The #4 plane, which is 9 inches (230 mm) in length, is the most common smoothing plane in use. Historically wooden smoothing planes in the United States have typically been 7 to 9 inches (180 to 230 mm) long with irons 11⁄2 to 21⁄2 inches (38 to 64 mm) wide.

What size is a number 4 plane?

The numbers 4 and 5 are by far the most common planes available today when searching for antiques because their blades are 2 inches (5.08 cm) wide, while the 1⁄2 sizes (4-1⁄2 and 5-1⁄2 ) are 2-3⁄8 inch wide.

How long is a number 3 plane?

The Stanley smoothing plane number 3 is in the region of 8 inch depending on the age/type of plane. As with all the Stanley bench planes, the Stanley 3 has universal interchanging parts.

What is a No 4 smoothing plane?

4 Smoothing Plane. Smoothing planes, as their name implies, are designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness.

What Is a Number 4 plane used for?

When used, the fore plane is either the first plane to be used on rough sawn timber, or is used after the jack plane. The fore plane is able to quickly remove material and level the workpiece before the woodworker moves on to using a jointer plane or smoothing plane.

How long is a No 6 Stanley plane?

Length: 460 mm (18in).

How long is a number 5 plane?

14” long The dimensions and materials of the No. 5 are as follows: 14” long and made from ductile iron, a 2” wide iron made from A2 steel that is . 125” thick, and overall the plane weighs 5 1/2 lbs.

What do plane numbers mean?

The numbers 1 to 8 simply refer to different lengths of plane with #1 being (very) short and #8 being pretty long. A #5 is a called a jack plane, a #6 is almost a jointer but is call a fore plane. As the numbers and length increase so does the width: a #4 has a narrow blade while an #8s blade is wide.

What wood planes do you need?

Every shop needs these planes: an adjustable-mouth block plane, a smoothing plane, a jointer plane, a shoulder plane, and an edge-trimming plane (or pair of edge-trimming planes). Master these five, and youll see a huge improvement in your woodworking output.

How long is a Stanley #5 plane?

Enhance your purchaseBrandStanley ToolsItem Dimensions LxWxH14.17 x 5.59 x 2.68 inchesItem Weight5.2 PoundsIncluded ComponentsComponents included

What is a number 5 plane used for?

Bench or Jack planes have a long base and are used for the initial preparation of rough timber. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness.

What does the N mean on airplanes?

registration number In the United States, the registration number is commonly referred to as an N number, because all aircraft registered there have a number starting with the letter N. An alphanumeric system is used because of the large numbers of aircraft registered in the United States.

What Is a number 4 plane used for?

When used, the fore plane is either the first plane to be used on rough sawn timber, or is used after the jack plane. The fore plane is able to quickly remove material and level the workpiece before the woodworker moves on to using a jointer plane or smoothing plane.

Are hand planes hard to use?

Planes are surprisingly simple tools but, as with all new things, theres a bit of a learning curve. To start, youll need to understand the parts and make sure that they are assembled correctly. Next, youll need a sharp blade and a bit of practice.

Are wood planers worth it?

If you really want to get into woodworking, a thickness planer is worth the cost. Once you have it, youll never regret the expenditure, because youll be in control of your stock thickness like never before. A fellow member might be willing to thickness-plane some stock for you for little or nothing.