What kind of sand do you use for Intex sand filter pump?

silica sand The recommended type is No. 20 grade silica sand, with specification of 0.45 to 0.85mm (0.018 to 0.033 inches) with a Uniformity Coefficient less than 1.75. Too fine of a grade of sand will clog too quickly, and too soft of a sand will break up and also cause clogging.

How do you start a sand filter pump for the first time?

0:462:05How to start your sand filtration system for the first time - YouTubeYouTube

Do sand pumps need chlorine?

A saltwater pump must function with a saltwater pool chemistry of 3,000 parts per million of salt, whereas the sand filter merely requires a basic, chlorinated swimming pool for filtration. Compared to the saltwater pump, the sand filter is a low-maintenance item.

How long should I run my above ground pool pump?

As long as it runs for at least 8 hours in every 24-hour period, youre good to go. Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time.

How do I prepare my yard for an above ground pool?

How to Prep Ground for an Above-Ground PoolChoose the best area of your yard to set up your pool. Mark the perimeter of the pool area. Remove all sod and other vegetation from the area. Determine the lowest point of the pool area. Create a wood level.More items