Question: Do plumbers install pool heaters?

How Much Does It Cost to Install a Pool Heater? Gas pool heaters should be installed by a qualified contractor. It involves pvc plumbing, gas plumbing, electrical wiring and possibly proper venting.

How much does a pool heater cost to install?

Pool Heater Pricing On average, to install or replace a pool heater its going to cost you between $1,000 and $4,000. Installation alone can start at $500 and run up to $1,000. The average pool heater costs nearly $3,000 for the heater and installation.

How long does it take to replace pool heater?

This depends on the size of the pool, so youll have to wait a few days before you can use it. If the outside temperature is cooler than the pool temperature, it can take as much as three days to heat up a larger pool.

How much does it cost to install a propane pool heater?

Gas or Propane Pool Heater Expect to pay $1,000 to $4,500 for the heater itself and $500 to $1,500 for labor. You could save some money by installing a pool heater when the pool itself is being constructed. Talk to your contractor about it as you figure out the cost to build an above ground pool.

Is it difficult to install a pool heater?

Replacing your old gas pool heater is not such a complicated task. Indeed, most pool owners hire a professional to replace their pool heater. Many states require gas appliances to be installed by a licensed contractor; but buying it, placing it and plumbing it – you can do yourself.

Does a pool heater go before or after the filter?

Water, cool to warm The heater should be installed downstream of the pump and filter and ahead of any automatic sanitizing equipment. That is, the water should be free of particulates or dirt when it enters the heater, and contact with corrosive chemicals should be kept to a minimum by their downstream placement.

Which is better a heat pump or gas heater for pool?

Heat pump pool heaters cost more than gas pool heaters, but they typically have much lower annual operating costs because of their higher efficiencies. With proper maintenance, heat pump pool heaters typically last longer than gas pool heaters. Therefore, youll save more money in the long run.

Can you add a heater to an existing inground pool?

In total you can add a pool heater to an existing pool. A swimming pool heat pump is you most efficient option. Heat pumps can add a month or more to your pool season especially combine with using a solar blanket.

Where should a pool heater be placed?

The heater is best located level with the surface of the pool — or as close to level as possible — because manufacturers pre-set their pressure switches for heater installations that are typically 3 feet above or below the pools surface.

How far should pool heater be from house?

Keeping your distance The rear and nonplumbed sides of the heater need at least 6 inches of clearance. The water-connection side should have a minimum of 12 inches of clearance — 18 inches is recommended. The front of the heater should have at least 24 inches of clearance.

Reach out

Find us at the office

Ravi- Hoult street no. 33, 84286 Santo Domingo, Dominican Republic

Give us a ring

Shammah Ceragioli
+38 858 597 690
Mon - Fri, 9:00-15:00

Join us