A 30-amp RV system uses 120 volts. Multiply 120 volts by 30 amps and we get a maximum allotment of 3600 watts.

What can I run off A 30 amp breaker?

In a typical RV with a 30 amp electrical service some of the power hungry appliances and portable devices are the air conditioner, electric water heater, microwave, coffee maker, electric skillet, hair dryer, space heaters and a toaster.

How much load can A 30 amp breaker handle?

A 30-amp outlet supplies 3,600 watts (30 amps multiplied by 120 volts). Therefore, the breaker on that outlet could meet code and still trip anywhere between a total load of 2,880 watts (80 percent of 3,600 watts) and 4,320 watts (120 percent of 3,600 watts).

How many things can you run on 30 amps?

Keeping in mind that a 30 amp plug has approximately 3,600 watts available to play with, it looks like there is enough power to run one A/C unit, refrigerator, and an electric water heater at once.

How far can I run A 30 amp circuit?

As long as its rated for 30 amps, there is no maximum distance. The question should not be how many feet, but how many cords. For example, two 50 foot, 30 Amp extension cords should be considered to have less capacity than one 100 foot extension cord.

Can I replace a 30 amp breaker with a 60 amp breaker?

Its necessary to have at least 6 wire for a 60 Amp breaker. I believe the OP is thinking of doubling the capacity of the single breaker. When he returns with pictures, well see. The answer isnt yes.

Does a 30 amp double pole breaker have 30 amps on each leg?

Question: Isnt a 30 amp double pole breaker is same as two 30 amp single pole breakers stuck together, so I can put 30 amps on each leg? Answer: Yes, because the breaker draws 30 amps from each leg 1 leg per each busbar.

Does a double pole 30 amp breaker equal 60 amps?

A main breaker is a large-amperage double breaker, same as any double breaker in the breaker box, except it supplies power to each busbar. So your question is like asking if you can draw 60 amps off a 30 amp double breaker the answer is NO. Why? Each leg on the 30 amp breaker delivers max 30 amp.

What size wire do I need to run for a 30 amp breaker?

10-gauge wire RULES OF THUMB. Many techs will repeat these rules of thumb and rely on them in all circumstances: “Twelve-gauge wire is good for 20 amps, 10-gauge wire is good for 30 amps, 8-gauge is good for 40 amps, and 6-gauge is good for 55 amps,” and “The circuit breaker or fuse is always sized to protect the conductor [wire].”